Electrical Safety for Railway Cable Systems

Locating and measuring without disconnecting
Troubleshooting and recurrent testing in cable systems

Permanently installed or portable Bender EDS fault location systems help with the quick and accurate pinpointing of faults, thus saving time and money.

As a preventative measure, all electrical equipment must be tested on a regular basis. This is in the best interest of the system operator. After all, tests prevent high repair costs and consequential damage as a result of poor maintenance. It is also the only way to guarantee the optimum configuration of devices and systems. Bender offers the solutions needed for measuring without disconnection.

Retrofitting
Does my system still meet the current requirements?

Even with state-of-the-art electrical engineering equipment, time can take its toll. Whether it is a decline in operational reliability, changes in statutory regulations or increasing energy costs: adapting to the latest state of the art is crucial. Typically, products to monitor energy quality and for troubleshooting are retrofitted. Get us to test your electrical systems and we will give you suggestions as to how to proceed.

Downloads

NameCategorySizeLanguageTimestampD-/B-Number
Product Overview ISOMETER®/ISOSCAN® Product Overviews 5.3 MB EN2024/02/1616.02.2024
2020 Guidelines (US) Technical Information 1.9 MB EN2020/06/1515.06.2020
Overview Brochure Product Overviews 10.3 MB EN2023/10/0202.10.2023
Bender Industry Applications Market Segment Brochures 5.9 MB EN2024/09/0404.09.2024
Electrical Safety Solutions for Railways and Transit Systems Market Segment Brochures 6.1 MB EN2020/06/1515.06.20200

Products

Ground-Fault Monitoring, Ungrounded

ISOMETER® iso685…
ISOMETER® iso685 Series

Ground-fault detector for ungrounded AC/DC systems

ISOMETER® isoRW425
ISOMETER® isoRW425

Ground-fault monitoring device for railway applications up to AC/DC 440 V

ISOMETER® isoRW685W-D
ISOMETER® isoRW685W-D

Ground-fault monitoring device tailored to the requirements of railway rolling stock applications

Ground-Fault Location, Ungrounded

ISOSCAN® EDS30…
ISOSCAN® EDS3090 Series

Portable ground-fault location systems for ungrounded and grounded systems

ISOSCAN® EDS440
ISOSCAN® EDS440 Series

Ground-fault location module for ungrounded AC/DC systems

ISOSCAN® EDS460-D
ISOSCAN® EDS460-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Ground-Fault Monitoring, Ungrounded

ISOMETER® iso685…
ISOMETER® iso685 Series

Ground-fault detector for ungrounded AC/DC systems

Details
ISOMETER® isoRW425
ISOMETER® isoRW425

Ground-fault monitoring device for railway applications up to AC/DC 440 V

Details
ISOMETER® isoRW685W-D
ISOMETER® isoRW685W-D

Ground-fault monitoring device tailored to the requirements of railway rolling stock applications

Details

Ground-Fault Location, Ungrounded

ISOSCAN® EDS30…
ISOSCAN® EDS3090 Series

Portable ground-fault location systems for ungrounded and grounded systems

Details
ISOSCAN® EDS440
ISOSCAN® EDS440 Series

Ground-fault location module for ungrounded AC/DC systems

Details
ISOSCAN® EDS460-D
ISOSCAN® EDS460-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details

Standards

IEC 60364-7-710

Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations

IEC 60947-6-1

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

EN 61557-8

Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V – Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 8: Isolationsüberwachungsgeräte für IT-Systeme

EN 61557-9

Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V – Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 9: Einrichtungen zur Isolationsfehlersuche in IT-Systemen