System Components
System components and accessories complete the Bender product portfolio:
Coupling devices for ground-fault monitoring at high voltages, analog measuring instruments, power supply units, interface converters and interface repeaters.
Please contact us for advice regarding these and other system components.
9 Products found
IOM441-S / IOM441W-S
Relay module for extension of Bender devices
AGH150
Extension of the nominal voltage range of ISOMETER® iso685… series to AC 0…1150 V, DC 0…1760 V
AGH204S-4
Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V
AGH520S
Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V
AGH675S-7
The coupling device AGH675S-7/AGH675S-7MV15 is designed to extend the nominal voltage range of the ISOMETER® IRDH275BM-7 to AC/DC 0…15.5 kV
AGH676S-4
Extension of the nominal voltage range of ISOMETER® iso685.../IR420-D64 series to AC 0...12 kV
7204 Series
The analog measuring instruments of the 96.../72... series are used for indication of measured values from Bender devices equipped with the appropriate current output
STEP-PS
Power supply units for supply of Bender devices with a supply voltage of DC 24 V
AN420
Power supply unit for measuring current transformers
IOM441-S / IOM441W-S
Relay module for extension of Bender devices
AGH150
Extension of the nominal voltage range of ISOMETER® iso685… series to AC 0…1150 V, DC 0…1760 V
AGH204S-4
Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V
AGH520S
Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V
AGH675S-7
The coupling device AGH675S-7/AGH675S-7MV15 is designed to extend the nominal voltage range of the ISOMETER® IRDH275BM-7 to AC/DC 0…15.5 kV
AGH676S-4
Extension of the nominal voltage range of ISOMETER® iso685.../IR420-D64 series to AC 0...12 kV
7204 Series
The analog measuring instruments of the 96.../72... series are used for indication of measured values from Bender devices equipped with the appropriate current output
STEP-PS
Power supply units for supply of Bender devices with a supply voltage of DC 24 V
AN420
Power supply unit for measuring current transformers
