Preventative maintenance and retrofitting old equipment to ensure electrical safety and facilitate periodic tests is essential but also a challenge for system operators. All electrical equipment must be tested regularly. Preventative maintenance is in the interests of the system operator as tests prevent high repair costs and consequential damage due to poor maintenance. It is also the only way to guarantee the optimum configuration of devices and systems. Bender offers solutions for measuring without disconnection.
Our first-class service ensures your facility achieves the maximum safety for your electrical systems. The services we offer range from telephone support to repairs and site calls. Thanks to our state-of-the-art instrumentation and expert staff, we can solve almost any request and query. The increasing health and safety requirements on machines and installations require comprehensive measures to protect employees and equipment against possible hazards. If there is a high availability requirement, it is also appropriate to consider this aspect when selecting the type of system and the protective measures. Ensuring a consistently high level of safety for increasingly complex installations is a task that represents a growing challenge for system operators. Different communication technologies, expanding function ranges, and continuously changing standards make assessing values and faults more difficult. We can offer support with this task on-site and via remote access, with high-quality service and advice through our expert network, offering operational, documentation, and commissioning support.
Even with state-of-the-art electrical engineering equipment, time can take its toll. Whether it is a decline in operational reliability, changes in statutory regulations, or increasing energy costs: retrofitting to the latest state of the art is crucial. Typically, products to monitor energy quality and for troubleshooting are retrofitted. Get us to test your electrical systems and we will give you suggestions as to how to proceed.
|Technical Information||2020 Guidelines (US)||5.6 MB||EN||2020/01/28 14:33:1428.01.2020 14:33:14|
|Product Overviews||Overview Brochure||4.2 MB||EN||2022/08/25 20:30:5725.08.2022 20:30:57|
Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment