ISOMETER® isoHR1685DW–925
- Insulation monitoring device for mobile, insulated elevating work platforms
- Protection when working on overhead lines under voltage
- Continuous insulation monitoring during operation
- Storage of data for verification of insulation condition
- Graphical representation of the insulation resistance over time (isoGraph)
The ISOMETER® isoHR1685DW-925 is designed for insulation monitoring on elevating work platforms/overhead catenary vehicles. Voltages of up to 1500 V make working on live overhead lines for local transport vehicles particularly hazardous. To protect operatives, overhead catenary vehicles are equipped with 2 insulation levels. Pollution, ageing or damage to these insulation levels can cause the current to be perceptible to people and presents an electrocution hazard.
The isoHR1685DW-925 makes a valuable contribution to improving the safety of work carried out on live systems of this kind.
The device is installed in the vehicle, where it continuously monitors the insulation level and notifies operatives immediately whenever defined insulation levels drop below defined thresholds during the approach, and both before and during maintenance work. Both insulation levels can be monitored.
- Insulation monitoring device for mobile, insulated elevating work platforms
- Protection when working on overhead lines under voltage
- Continuous insulation monitoring during operation
- Storage of data for verification of insulation condition
- Graphical representation of the insulation resistance over time (isoGraph)
The ISOMETER® isoHR1685DW-925 is designed for insulation monitoring on elevating work platforms/overhead catenary vehicles. Voltages of up to 1500 V make working on live overhead lines for local transport vehicles particularly hazardous. To protect operatives, overhead catenary vehicles are equipped with 2 insulation levels. Pollution, ageing or damage to these insulation levels can cause the current to be perceptible to people and presents an electrocution hazard.
The isoHR1685DW-925 makes a valuable contribution to improving the safety of work carried out on live systems of this kind.
The device is installed in the vehicle, where it continuously monitors the insulation level and notifies operatives immediately whenever defined insulation levels drop below defined thresholds during the approach, and both before and during maintenance work. Both insulation levels can be monitored.
Caractéristiques
- ISOMETER® pour plates-formes élévatrices mobiles, isolées
- Surveillance continue des deux niveaux d'isolement des plates-formes élévatrices même en cours de fonctionnement
- Stockage des données pour attester l'état de l'isolement. Le cas échéant, pour la charge de la preuve après un accident électrique
- Fonction isoGraph pour la représentation dans le temps de la résistance d´isolement)
- Interface RS-485 avec protocole BMS et Modbus RTU pour la transmission des données, des alarmes, de la validation de la
- communication existante vers la plate-forme
- Historique avec horloge temps réel (tampon 13 jours) pour la sauvegarde de 1023 messages d´alarme horodatés
- Entrées numériques librement programmables
- Autotest automatique de l´appareil à signalisation automatique en cas de défaut
- Auto-surveillance des raccordements
- Valeurs de réponse spécifiées réglables séparément Ran1 (Alarme 1) et Ran2 (Alarme 2) pour préalarme et alarme
- Afficheur LCD graphique haute résolution pour une lecture et une saisie aisées de l´état de l´appareil
- Mesure de défauts d´isolement à haute impédance 100 kΩ…20 GΩ
- Adaptation automatique aux capacités de fuite élevées du réseau
Applications
- Contrôleur permanent d´isolement pour plates-formes élévatrices mobiles, isolées
ISOMETER® isoHR1685DW–925 Variante(s)
| Type | Tension d´alimentation* | Domaine de la valeur de réponse | Tension nominale | Réf. |
|---|---|---|---|---|
| isoHR1685DW-925 | DC 18…30 V | 100 kΩ…100 MΩ | AC 0…1000 V, DC 0…1500 V | B91065806W |
* Valeurs absolues
Téléchargements pour ISOMETER® isoHR1685DW–925
| Type | Nom | Taille | Langue | Horodatage | D-/B-Numéro |
|---|---|---|---|---|---|
| Déclarations de conformité CE | isoXX1685 | 89.1 Ko | 2023/06/12 05:32:4812.06.2023 05:32:48 | ||
| Déclarations de conformité | UKCA - isoXX1685 | 122.0 Ko | 2023/06/12 05:32:0612.06.2023 05:32:06 | ||
| Notices | isoHR1685DW-925 | 439.1 Ko | DE | 2021/05/28 07:02:4428.05.2021 07:02:44 | D00369 |
| Notices | isoHR1685DW-925 | 436.6 Ko | EN | 2021/05/28 07:02:5028.05.2021 07:02:50 | D00369 |
| Manuels | isoHR1685DW-925 | 5.6 Mo | DE | 2021/05/20 11:49:4920.05.2021 11:49:49 | D00369 |
| Manuels | isoHR1685DW-925 | 5.9 Mo | EN | 2021/05/28 07:03:1328.05.2021 07:03:13 | D00369 |
| Notices | isoHR1685DW-925 | 438.5 Ko | FR | 2021/05/28 07:02:5928.05.2021 07:02:59 | D00369 |
| Notices | isoHR1685DW-925 | 439.1 Ko | ES | 2021/05/28 07:02:5528.05.2021 07:02:55 | D00369 |
| Dépliants | Na, kribbelt`s Ihnen auch in den Fingern? (isoHR1685) | 1.6 Mo | DE | 2023/08/29 05:49:1529.08.2023 05:49:15 | D00369 |
| Dépliants | Do you also have a tingling sensation in your fingers? (isoHR1685) | 1.6 Mo | EN | 2023/08/29 05:49:2129.08.2023 05:49:21 | D00369 |
| Dépliants | ¿También usted siente hormigueo en los dedos? (isoHR1685) | 2.0 Mo | ES | 2018/04/16 06:12:5216.04.2018 06:12:52 | D00369 |
| Quickstarts | isoHR1685DW-925 | 1.2 Mo | DE | 2021/02/18 15:27:4818.02.2021 15:27:48 | D00369 |
| Quickstarts | isoHR1685DW-925 | 1.2 Mo | EN | 2021/02/18 15:27:4818.02.2021 15:27:48 | D00369 |
| Logiciels | iso1685 Set V2.1 | 48.1 Ko | 2019/05/13 10:31:5913.05.2019 10:31:59 |